Toggle Nav
Troubleshooting Guide - Pressroom Conventional
On Press Issue: Plate Blinding
Solution: Change blanket and use packing gauge (if possible) to check pressure.
Solution: Check with durometer gauge. Replace rollers as needed.
Solution: Set to correct specification.
Solution: Check ink grind, fountain solution, solvents, etc. Replace all contaminated material.
Solution: Wash plate. If problem persists, have plate remade.
Solution: Check packing with packing gauge. Improper packing causes different surface speeds between plate and blanketand will wear image prematurely.
Solution: Stripe rollers to the plate. Review press manufacturers specifications and adjust if necessary.
Technical Problem Solving is Just a Form Away!
Fill out the form below and one of our technical or color experts wll connect with you shortly!
